Passive explosion protection systems


Explosion relief consists in taking out explosion effects (mainly pressure), through a venting system, outside the protected device.

PRODUCTS

VALVEX BACK PRESSURE FLAP

IT IS A MECHANICAL VALVE, DESIGNED TO PROTECT AGAINST FIRE AND PRESSURE PROPAGATION THROUGH PIPELINES, LINES TO OTHER ELEMENTS OF INSTALLATIONS.

VENTEX BACK PRESSURE FLAP

VENTEX PASSIVE ACTING VALVES, PROVIDED BY FIKE, ARE ABLE TO CLOSE RAPIDLY EVERY EXPLOSION, AT SHORT DISTANCE

CV EXPLOSION PANEL

EXPLOSION CV (COMPOSITE VENT) PANEL TYPE ARE OF LOW WEIGHT, WHICH ALLOW PROTECTION WITHOUT ITS BREAKING UP.

CV-S EXPLOSION PANEL/EXPLOSION FLAP

EXPLOSION PANELS CV-S TYPE ARE EMPLOYED WHEN WORK PRESSURE APPROACHES EXPLOSION ONE OR WHEN A HIGH UNDERPRESSURE TAKES PLACE.

HI-CV EXPLOSION PANEL

EXPLOSION VENTS ARE THE WEAKEST LINK IN INSTALLATION SYSTEM, DUE TO TAKING ON A REPOSSESSION OF DEFLAGRATION PRESSURE.

HI-CV-S EXPLOSION PANELS

FIKE’S NON-DIVISIBLE RUPTURE PANEL HI TYPE PROTECTS INDUSTRIAL APPLIANCE PROTECTION.

SANI-V EXPLOSION PANEL

CIP/SIP PROCEDURES CAN BE APPLIED, AS SPECIFIC NEEDS OF CLEAN PRODUCTION ENVIRONMENTS ARE REQUIRED AND A HIGH DEPENDABILITY IS ASSURED.

SANI-V-S EXPLOSION PANELS

PANEL CHARACTERIZES IN HIGH EFFICIENCY AND RESISTANCE TO UNDERPRESSURE. CIP/SIP PROCEDURES CAN BE APPLIED DUE TO PARTICULAR EDITION ACCESSIBILITY.

VV-S EXPLOSION PANEL

MEMBRANES VV-S TYPE ARE OF LOW WEIGHT AND WHICH ALLOW PROTECTION WITHOUT ITS BREAKING UP.

ELEGUARD EXPLOSION PANEL

FIKE’S ELEGUARD IS EXPLOSION OFFLOADING DEVICE, PARTICULARLY DESIGNED FOR BUCKET CONVEYOR TO PROTECT AGAINST EXPLOSION’S SIDE-EFFECTS.

FLEX-V EXPLOSION PANEL

EXPLOSION VENTS ARE THE WEAKEST LINK IN INSTALLATION SYSTEM, DUE TO TAKING ON A REPOSSESSION OF DEFLAGRATION PRESSURE.

EXCOVER FLOOR COVERING

EXCOVER OFFERS WEIGHTLESS AND CORROSION RESISTANT CONSTRUCTION, WHICH AVERS RUPTURE PANELS PROTECTION AGAINST DUST, WIND, SNOW OR OTHER SUCH AGENTS

FLAME QUENCHER FLAMEQUENCH II SQ

FLAME QUENCHER FLAMEQUENCH II SQ IS THE ONLY ONE ELEMENT, WHICH CAN BE COMBINED WITH RUPTURE PANELS.

FLAME QUENCHER ELE-QUENCH

FIKE DESIGNED FLAMELESS OFFLOADING SOLUTION ELEGUARD TYPE, WHICH IS COMBINED WITH RUPTURE PANEL. THE ASSEMBLY OF UNIT AT LEG AND HEAD OF ELEVATOR IS EASY.

Fike Corporation was established since 1945, USA. The headquarter is places at Blue Springs, Missouri. From the beginning company was focused on implementation of industrial explosion and fire protection systems, based on gained experience. Since that time, many branches have been launched all over the world (Belgium, France, Germany, Italy, Great Britain, Spain, Canada, Japan, Brazil, India, Bahrain, Malaysia.

In Poland, official representative of Fike is CORONA Sp. z o.o. The most recognized Fike products are rupturę panels and bursting disc (explosion offloading), active protection systems against explosion (HRD/SRD) and passive – such as flame quenchers (flameless offloading) or other modern solutions as pinch valves or fast activating valves. Common feature of all the equipment is, beside increasing the level of safety, significant increase of economic aspects – lowering the exploitation costs.

CORONA company offers delivery, full servicing all FIKE’s units. Products have all needed approvals and certificates, ATEX included.

let's meet

"CORONA" Engineering & Trade Office
16/27 John Baildon St. 40-115 Katowice Poland

give me a call

tel. +48 32 255 53 53
fax:+48 32 720 20 88
Service: +48 32 258 56 43

write an email

Office: biuro@corona.org.pl
Service: serwis@corona.org.pl

© 2018 Copyright by Corona | All rights reserved

EnglishPolandCzechRussiaLithuania