Explosion vents
Bursting panels, also known as explosion vents, are the simplest deflagration protective units, widely applied in industry. The main feature is a high rate of reliability and high cost-efficiency, as the price is low and infrequent servicing is involved.
CORONA proposes a broad range of FIKE’s rupture membranes, devoted to all branches of manufacture. Especially hygienic line of products for food industry have been laid down, which are adapted to CIP/SIP procedures.
PRODUCTS
CV EXPLOSION PANEL
EXPLOSION CV (COMPOSITE VENT) PANEL TYPE ARE OF LOW WEIGHT, WHICH ALLOW PROTECTION WITHOUT ITS BREAKING UP.
CV-S EXPLOSION PANEL/EXPLOSION FLAP
EXPLOSION PANELS CV-S TYPE ARE EMPLOYED WHEN WORK PRESSURE APPROACHES EXPLOSION ONE OR WHEN A HIGH UNDERPRESSURE TAKES PLACE.
HI-CV EXPLOSION PANEL
EXPLOSION VENTS ARE THE WEAKEST LINK IN INSTALLATION SYSTEM, DUE TO TAKING ON A REPOSSESSION OF DEFLAGRATION PRESSURE.
HI-CV-S EXPLOSION PANELS
FIKE’S NON-DIVISIBLE RUPTURE PANEL HI TYPE PROTECTS INDUSTRIAL APPLIANCE PROTECTION.
SANI-V EXPLOSION PANEL
CIP/SIP PROCEDURES CAN BE APPLIED, AS SPECIFIC NEEDS OF CLEAN PRODUCTION ENVIRONMENTS ARE REQUIRED AND A HIGH DEPENDABILITY IS ASSURED.
SANI-V-S EXPLOSION PANELS
PANEL CHARACTERIZES IN HIGH EFFICIENCY AND RESISTANCE TO UNDERPRESSURE. CIP/SIP PROCEDURES CAN BE APPLIED DUE TO PARTICULAR EDITION ACCESSIBILITY.
VV-S EXPLOSION PANEL
MEMBRANES VV-S TYPE ARE OF LOW WEIGHT AND WHICH ALLOW PROTECTION WITHOUT ITS BREAKING UP.
ELEGUARD EXPLOSION PANEL
FIKE’S ELEGUARD IS EXPLOSION OFFLOADING DEVICE, PARTICULARLY DESIGNED FOR BUCKET CONVEYOR TO PROTECT AGAINST EXPLOSION’S SIDE-EFFECTS.
FLEX-V EXPLOSION PANEL
EXPLOSION VENTS ARE THE WEAKEST LINK IN INSTALLATION SYSTEM, DUE TO TAKING ON A REPOSSESSION OF DEFLAGRATION PRESSURE.
EXCOVER FLOOR COVERING
EXCOVER OFFERS WEIGHTLESS AND CORROSION RESISTANT CONSTRUCTION, WHICH AVERS RUPTURE PANELS PROTECTION AGAINST DUST, WIND, SNOW OR OTHER SUCH AGENTS
Fike Corporation was established since 1945, USA.
The headquarter is places at Blue Springs, Missouri. From the beginning company was focused on implementation of industrial explosion and fire protection systems, based on gained experience.
Since that time, many branches have been launched all over the world (Belgium, France, Germany, Italy, Great Britain, Spain, Canada, Japan, Brazil, India, Bahrain, Malaysia.
In Poland, official representative of Fike is CORONA Sp. z o.o.
The most recognized Fike products are rupturę panels and bursting disc (explosion offloading), active protection systems against explosion (HRD/SRD) and passive – such as flame quenchers (flameless offloading) or other modern solutions as pinch valves or fast activating valves. Common feature of all the equipment is, beside increasing the level of safety, significant increase of economic aspects – lowering the exploitation costs.
CORONA company offers delivery, full servicing all FIKE’s units. Products have all needed approvals and certificates, ATEX included.
